スライド 42 / 81
ノート :
*silent* The *silent* setting directs the Access Point to not display any events immediately on the console, the console log, or the GUI log.
System Fatal, Protocol Fatal, Port Fatal
The Fatal settings indicate an event that prevents operation of the port or device. For operation to
resume, the port or device usually must be reset.
System alert, Protocol alert, Port alert, External alert
The Alert settings indicate events of which an administrator specifically requested to be informed.
System warning, Protocol warning, Port warning, External warning
The Warning settings indicate that a failure has occurred.
System information, Protocol information, Port information, External information
The Information settings indicate a normal action that isn’t fatal (that is, the port has been turned off, the rate setting has been changed, etc.)
_ System refers to the Access Point as a whole.
_ Protocol refers to a specific communications protocol in use, such as HTTP or IP.
_ Port refers to the Access Point’s Ethernet or radio network interface.
_ External refers to a device on the network other than the Access Point.
