スライド 75 / 81
ノート :
Overrun Errs The number of packets received when no receive buffers were available. These errors usually occur when the host does not read the received packets from the client adapter fast enough.
PLCP CRC Errs The number of times the client adapter started to receive an 802.11 physical layer convergence protocol (PLCP) header but the rest of the packet was ignored due to a cyclic redundancy check (CRC) error in the header
PLCP Format Errs The number of times an 802.11 PLCP header was received with a valid CRC but the rest of the packet was ignored due to an unknown value in the header
PLCP Length Errs The number of times an 802.11 PLCP header was received but the rest of the packet was ignored due to an illegal header length
MAC CRC Errs The number of packets that had a valid 802.11 PLCP header but contained a CRC error in the data portion of the packet
Partial Pkts The number of fragments that were discarded because the entire packet was not received successfully
SSID Mismatches The number of times the client adapter tried to associate to an Access Point but was unable to because the adapter’s SSID was not the same as the Access Point’s
AP Mismatches The number of times the client adapter tried to associate to an Access Point but was unable to because the Access Point was not the adapter’s specified Access Point
Authentication Rejects The number of times the client adapter tried to authenticate to an
Access Point but was rejected
