スライド 71 / 81
ノート :
Fragment Threshold Defines the threshold above which an RF data packet will be split up or fragmented.
Data Retries Defines the number of times a packet will be resent if the initial transmission is unsuccessful.
Authentication Type Controls the validation of your client adapter’s WEP key
Open Allows your client adapter, regardless of its WEP settings, to authenticate and attempt
to communicate with an Access Point
Shared Key Permits your client adapter to communicate only with Access Points that have the same WEP key(s).
Data Rate Specifies the rate at which you want your client adapter to transmit or receive packets to or from Access Points (in infrastructure mode) or other clients (in ad hoc mode)
Channel Specifies which frequency your client adapter will use as the channel for communications. Transmit Power Defines the level at which your client adapter transmits power.
Short Preamble Determines if your client adapter uses short radio headers when transmitting. Short radio headers improve throughput performance; long radio headers ensure compatibility with clients and Access Points that do not support short radio headers.
Enable LEAP Enables or disables LEAP for your client adapter
Enable WEP Enables or disables WEP for your client adapter.
Allow Association To Mixed Cells If your network’s Access Points are set to communicate with either WEP-enabled or WEP-disabled clients you must select this checkbox, even if your
client adapter is not using WEP. If this setting is not enabled, your client adapter will not be able to establish a connection with the Access Point.
World Mode Selecting this checkbox enables the client adapter to assume the transmit power level and channel set of the Access Point to which it is associated.
