スライド 72 / 81
ノート :
Transmit Antenna Mode Specifies the antenna that your client adapter uses to transmit data
Receive Antenna Mode Specifies the antenna that your client adapter uses to receive data.
Specified Access Point 1- 4 Specifies the MAC addresses of up to four preferred Access Points to which you want to associate. If the specified Access Points are not found or you roam out of range, you may associate to another Access Point. These parameters are not available in ad-hoc mode.
RTS Threshold Specifies the size of the data packet that the low-level RF protocol issues to a request-to-send (RTS) packet
RTS Retry Limit Specifies the number of times the client adapter will resend a request-to-send (RTS) packet if it does not receive a clear-to-send (CTS) packet from the previously sent RTS packet. You can type a number in the edit box to change this value.
Beacon Period (K....s) (Ad Hoc only) Specifies the duration between beacon packets, which are used to help clients find each other in ad hoc mode
Wake Duration (K....s) (Ad Hoc only)Specifies the amount of time following a beacon that the client adapter stays awake to receive announcement traffic indication message (ATIM) packets, which are sent to the adapter to keep it awake until the next beacon
